Mobile phone, computer touch screen uv curing machine [uvled surface light source]. Touch screen is an inductive liquid crystal display device that can receive touch input signals. When touching the graphical buttons on the screen, the haptic feedback system on the screen can drive various connecting devices according to pre-programmed programs, which can be used to replace the mechanical button panel, and create vivid audio and video effects through the liquid crystal display screen. In order to improve efficiency, touch screen curing has always been a concern in the industry. Now recommend a new type of touch screen curing – touch screen uv curing uvled surface light source.
The touch screen [uv curing] is cured with uvled surface light source, uvled surface light source is a semiconductor light emitting device that directly generates ultraviolet light, and is a light source with a wavelength from 200nm to 450nm in a certain proportion. Uvled surface light source has the characteristics of soft light, no eye damage, power saving, natural light, wide irradiation area, uniform spot, longer life, stronger light and so on. Led UV balanced light source for LCDPCB, equal exposure. Energy saving and environmental protection than traditional mercury lamps!
Touch screen uv curing – uvled surface light source:
In the traditional LAMP method, the heat dissipation area of the high-power light source is small, and even the use of a large number of radiators cannot quickly export heat, so the light decays fast. The same power cooling surface of Uvled light source is dozens of times larger than uvled point light source, and the heat dissipation effect is very good. The life span can reach 25,000-30,000 hours. The service life is not affected by the number of times of opening and closing, the use of cable output, compared with the traditional LAMP method irradiation machine, replace the lamp frequently, high power consumption, but also need UV fiber output, led surface light source can reduce the cost of equipment ancient supplies for you to provide equipment utilization. The wave peak of the luminous part led is 365NM, the spectral distribution is 360nm to 370nm, and no infrared light is emitted, so the surface of the irradiated product does not increase the temperature, and the traditional LAMP ultraviolet irradiation machine will generally increase the surface of the irradiated product by 60-90 degrees, resulting in displacement and deformation of the product positioning, resulting in poor and damaged products. Many led luminous points are evenly distributed, and many groups are professional lens groups optimized for UV irradiation, with good irradiation uniformity. The edge and center of the irradiation intensity change is only 3%, which is unmatched by mercury lamps. Stable light output, stronger light, higher energy, better uniformity, instant lighting, immediately reach 100% power ultraviolet output, irradiation intensity up to 1200wm/cm2, effective luminous efficiency is more than 10 times that of mercury lamp, improve the work efficiency can be customized according to the needs of users in different luminous areas and sizes.
Uvled surface light source does not need LAMP preheating when used, does not contain toxic mercury, compared with the traditional LAMP method irradiation machine power consumption of hundreds of watts, even up to kilowatts, preheating more than 10 minutes when used, the lamp is still toxic substances. Uvled surface light source is a safe and environmentally friendly choice to replace traditional light source technology, which is more in line with the requirements of energy conservation and environmental protection.
The above explanation is the relevant knowledge of uvled curing surface light source commonly used in mobile phones and computer touch screens. Auvcure is a professional manufacturer of all kinds of UVLED point light source, [UVLED line light source], UVLED surface light source and [UV curing machine], and can provide solutions and customization according to the actual needs of customers. The company has Japanese production technology, products are exported to South Korea, Japan, the United States, Brazil and other places. Welcome friends from all walks of life exchange guidance. If you want to know more about the UV curing machine, welcome to consult customer service online or call the company’s service hotline for consultation, we will be happy to provide you with quality service! Some of the information/pictures in this article are from the Internet, only for the purpose of sharing new information in the industry, not for commercial use. If any rights are involved, please inform us immediately, and we will delete it immediately. Thank you.
