Feature:
1: The light source parameters can be set through the touch screen.
2: Multi-channel independent drive, parameters can be adjusted independently, with switch light delay setting.
3: Provide a variety of I/O interface control and signal feedback.
4: Provide TCP/IP network interface, MODBUS network protocol, can realize MEMS system data connection.
5: It has alarm functions such as lamp head temperature, short circuit, open circuit, abnormal power, and life decay, as well as foolproof; power down and other functions.
6: With UV on-line illuminance meter, it can realize adaptive control of light source power.
7: Provide a variety of communication interfaces: RS232/RS485/TCP/IP, the communication meets the standard MODBUS protocol.
8: Use shielded high-flexible drag chain cables to meet the needs of automated assembly and industrial environments.
UV LED TUNNEL Performance and parameters
| Controller | |||
| Dimensions (mm) | Depends on light source | Material/Color | Sheet metal /Black |
| Input power | 100-240V AC50-60HZ | Standby power consumption | <50W |
| Weight KG | 1kg-5kg-10kg
|
Power adjustment range | 10-100%
|
| Setting interface | Touch screen + password | Controller back-end serial port | Foot pedal, single-chip, PLC, RS232/RS845/TCP |
| Light source | |||
| Irradiation area | Customized | Power requirements | 100~240V
AC 50/60HZ |
| Uniformity | ≥95% | Irradiation intensity | 50-10000mw/cm2 |
| Use light source | High-power LED ultraviolet diode (imported) | Time setting | 0.1~999.99 seconds |
| Output wavelength | UV365, 395, 405, 450, 470(±10nm) | Control method | Automatic or manual control |
| Light intensity adjustment | 0—100% | Illumination distance | Depends on the luminous area |
| Conveyor | |||
| Speed | 0-5m/min | Cooling system | Air out at top |
| Material/Weight | High quality steel +aluminum | Transmission | Teflon/Stainless steel |
